Aerated Grit Systems Product Overview
Aerated Grit systems can be adapted to varying flow conditions
allowing grit to be captured but organics to pass through.
Benefits
Truly Non-Clogging
Enviroquip’s MS and TransMAX® air diffusers are
accepted by engineers and operators as truly non-clogging diffusers.
Clogging is eliminated by separating the air metering orifice
from the diffuser and locating the orifice above the liquid
level in the basin. Thus, no liquids or solids are ever in
contact with orifice restriction, the point at which other
diffusers most frequently clog. Enviroquip was the first in
the industry to provide this unique patented feature*.
Advantages of Enviroquip's above-water orifice:
- No solids contact
with the orifice
- Airflow uninhibited through complete length
of the pipe
- No moving parts
- No swivel joints required to service the
orifice
- Full access to orifice system assembly above the
water surface
- Non-clogging orifice eliminates need for redundant
diffusers
- Blowers operate at the same discharge pressure
over the life of the equipment, ensuring uniform air distribution
- Reduces
odor problems caused by accumulations of settled solids.
Zero In-Basin Maintenance
Advantages of Enviroquip’s
diffuser systems:
- A truly non-clogging diffuser
- No replacement of units
- No swivel joints
- No gas cleaning
- Fabricated from ABS plastic, a non-corrosive
and UV resistant material, and stainless steel drop
pipes
- A maintenance free aeration system
- No lubrication
- No icing and spray in cold climates
- No parts replacement
due to mechanical wear
Applications
- Basin volume provides five minute detention at
peak floAir introduced at approximately 20 scfm/kcf
- Raw
waste is aerated to initiate process
- Air/mixing action
strips out hydrogen sulfide
- Low maintenance
Headworks Integrated Systems includes:
|
